10MM Chamber Support Part3: Buffalo Bore 180gr

| December 28, 2019 | 1 Comments

Cartridge is from Ammo Manufacture: Buffalo Bore 180gr JHP (Data was provided by Mr.Revolverguy 12/2019)
Ballistics Information: 10mm Auto
Muzzle Velocity: 1324 fps Verified with Chronograph
Muzzle Energy: 700 ft. lbs
Brass Make/Headstamp: Starline – Brass
Bullet Make/Weight/Construction/Info; Length 0.619”/Dia. 0.4000”: Hornady XTP 180gr. JHP
HP depth 0.106” / HP dia 0.168” 
Actual weight: 180.2 grains 
C.O.A.L.: 1.251 Measured 10 rounds all very consistent
Primer: Large Pistol Silver color
Case: Crimp Diameter 0.421” Middle Diameter 0.419” Base/Web: Before the extractor groove 0.421″ 
Powder Description/Positive ID/Type/Charge Weight: Alliant Power Pistol 9.6 grains

💥Danger💥 Do Not try to replicate this load it may cause destruction or bodily harm💥

One of the viewers made a suggestion that I should fire 1 round a piece in each pistol and measure the brass. At first I thought wow that is a lot of work but my dedication to the viewers proved to be what I needed to get this done.

Don’t forget to visit the largest 10MM Balistics Database on the Internet https://docs.google.com/spreadsheets/d/1Fyj-rKIvGOvm4huvb35GaGMlyKhddtUDQhFi9VGrwLk/edit?usp=sharing

GD Star Rating
loading...
GD Star Rating
loading...
10MM Chamber Support Part3: Buffalo Bore 180gr, 10.0 out of 10 based on 1 rating

About the Author:

Filed in: Uncategorized
×

1 Comment on "10MM Chamber Support Part3: Buffalo Bore 180gr"

Trackback | Comments RSS Feed

  1. The Shadow says:

    When I tested these Buffalo Bore 180 gr. JHPs in my 10mm S&W1006 5″ got 1349 fps. I run a 22 lbs recoil spring and the chamber is 0.4280″ June 8, 2013
    Case expanded to 0.4275″, primer slightly flattened.

    GD Star Rating
    loading...
    GD Star Rating
    loading...

Post a Comment