Ammunition

Speeds, Feeds and Ballistics 40S&W — I Shot My Chronograph

Speeds, Feeds and Ballistics 40S&W — I Shot My Chronograph

| April 24, 2019 | 1 Comments

Another episode of Speeds, Feeds and Ballistics this time with 40S&W. Much like the first video of testing 10MM through a pistol and carbine we put 40S&W through the same test. But this time I have a little bit of a surprise for everyone and no it is not the fact that I shot my […]

×
Caliber Wars

Caliber Wars

| April 20, 2019 | 0 Comments

Speeds Feeds and Ballistics Federal, Speer 9MM and 40S&W go head to head in the clear ballistics Gel. Lets see how they compare to the 10MM Slugfest https://www.youtube.com/watch?v=eXOf9vAAtOw In Gel Penetration, expansion and weight retention Digg this post Recommend on Facebook Tweet about it Subscribe to the comments on this post Bookmark in Browser Tell […]

×
Mr.RevolverGuy Pushing The Speer’s 200 grain Gold Dot Limits

Mr.RevolverGuy Pushing The Speer’s 200 grain Gold Dot Limits

| April 7, 2019 | 0 Comments

Speeds Feeds and Ballistics For years 10MM enthusiast like myself has dreamed of the day that Speer would release it’s 10MM gold dot bullet as a reloading component.  I was able to get my hands on a few and wanted to load full power 10MM with them. The 10MM factory load as shot here https://www.youtube.com/watch?v=eXOf9… seems […]

×
Speeds Feeds and Ballistics — Norma 10MM, Jesse James and Underwood

Speeds Feeds and Ballistics — Norma 10MM, Jesse James and Underwood

| April 1, 2019 | 1 Comments

30 Year old Norma 10MM was test across the chronograp and into ballistics gel. Thanks to Overkill338 I was able to get my hands on some. Originally this ammo was spec’d at 1400fps as seen in this video 30 years of storage had a negative effect on velocity. I also compared the new comer Jesse […]

×
45 Colt Carbine — Hog Hunter

45 Colt Carbine — Hog Hunter

| March 16, 2019 | 0 Comments

After making the first video, 45 Colt Old But Still Useful with the 45 Colt Buffalo Bore 225gr Anti Personnel round. I received a couple of emails asking if the full wad cutter of the Buffalo Bore would feed in a carbine/lever action. I decided this would make for good content. If I could get […]

×